[Prev]   [TOC][FAQ][Bugs][Home]   [Next]

Release Notes

This section highlights important changes that have occurred and important usage details which you should be aware of before using MHonArc. If you are upgrading from a previous release, make sure to check for the highlighted incompatibilites from earlier releases.

NOTE:

Read the CHANGES document included in the distribution for a more complete summary of changes to MHonArc.


Compatibility Notes

This sections provides notes dealing with compatibility issues if upgrading from a previous release of MHonArc:

UPGRADING FROM v2.6.11 OR EARLIER: Handling of return value for $mhonarc::CB{Raw}MessageBodyRead Changed

NOTE:

If you do not utilize MHonArc's callback API, you can ignore this compatibility item. However, if you use the mha-preview example script, continuing reading.

In v2.6.12, the return value for the $mhonarc::CBMessageBodyRead and $mhonarc::CBRawMessageBodyRead is now checked to see if the message should be excluded from further processing. In previous versions, the return value was N/A. Therefore, if you use either of these callbacks, and the return value of your routines evaluates to false for a given message, the message will be excluded from the archive.

If you never want to exclude messages with either of these callbacks, have your routines always return 1.

NOTE:

The example mha-preview script provided in the MHonArc distribution has been updated to reflect the change in return value handling. Even though it is statistically unlikely messages will be quietly excluded with older versions of the script; it is recommended to replace your copy with the latest version.

UPGRADING FROM v2.5.x OR EARLIER: Default iso-2022-jp Converter Changed

In v2.6, the default charset converter for iso-2022-jp has changed to the following:

<CharsetConverters>
iso-2022-jp; MHonArc::CharEnt::str2sgml; MHonArc/CharEnt.pm
</CharsetConverters>

This filter converts all Japanese characters into Unicode character entity references (e.g. &#x7279;) removing the iso-2022-jp encoding. For some Japanese locales, this type of conversion may not be desired since some Japanese-aware processing tools may not support Unicode character entity references. If you want to preserve the iso-2022-jp encoding, you must explicitly specify the use of iso_2022_jp::str2html via the CHARSETCONVERTERS resource as follows:

<CharsetConverters>
iso-2022-jp; iso_2022_jp::str2html; iso2022jp.pl
</CharsetConverters>

The change to MHonArc::CharEnt::str2sgml as the default converter for iso-2022-jp was done to make MHonArc as locale neutral as possible in its default configuration.

For more information about using MHonArc in a Japanese locale, see (documents in Japanese): <http://www.mhonarc.jp/>

UPGRADING FROM v2.4.x OR EARLIER: DEFRCNAME Change

The default value for the DEFRCNAME is now called ".mhonarc.mrc", or "mhonarc.mrc" under Windows and VMS. The old value was ".mhonarc.rc", or "mhonarc.rc". If you use the default resource file, you will need to rename the file to match the filenames used for v2.5 and later.

UPGRADING FROM v2.4.x OR EARLIER: HEADER and FOOTER Removed

The HEADER and FOOTER resources are no longer supported. If you are using these resources, the HEADER content and FOOTER content will be lost once v2.5, or later, of MHonArc processes an archive containing these resources.

The HEADER and FOOTER resources have been deprecated for a long time since they only applied to the main index; the thread index has no equivalent. The IDXPGBEGIN or LISTBEGIN resources can be used to achieve the same effect of HEADER. The IDXPGEND or LISTEND can be used to achieve the same effect of FOOTER.

UPGRADING FROM v2.4.x OR EARLIER: MIMEFILTERS API Change

The API for data filters registered via MIMEFILTERS is not capability with filters written for v2.4.x and earlier. See CHANGES and the documentation for the MIMEFILTERS resource for the API.

If you use custom style filters written for v2.4.x, or earlier, you will need to update them for them to work properly under v2.5, and later.

UPGRADING FROM v2.1.x OR EARLIER: Database Format Change

If you have archives created with v2.1.x, or earlier, the format of mime-related resources is not compatible with v2.2, and later, versions. MHonArc will reset the mime-related resources CHARSETCONVERTERS and MIMEFILTERS to their default values. MIMEARGS will also be reset to the default value unless you are upgrading to v2.5.8, or later, where the MIMEARGS settings will be preserved.

To avoid the resetting of the mime-related resource if you are using customized settings, you will need to re-specify your settings the next time you update an archive. If you always specify your resource settings each time you invoke MHonArc, then your settings should to still take effect.

You can also use the mha-dbedit program to apply your settings directly without processing the archive.

DOWNGRADING TO OLDER VERSIONS

CAUTION:

Downgrading to an earlier version of MHonArc can corrupt your archives, especially when downgrading to an older version that used different database file storage formats from the current version in use.

Changes in archive format are not common, so downgrading can be okay depending on the versions involved. The key versions to watch out for are the ones noted in this section where database format changes have occured. The following lists release numbers where a format change occured:

For example, if an archive was last updated with v2.5.0, processing the archive with a previous release will cause problems.

A possible method for successfully downgrading to a release with differences in the database format, is to try to reconstruct the database file using the mha-dbrecover utility contained in the MHonArc version the archive is being downgraded to.

TIP:

The safest way to downgrade is to recreate an archive from the original raw mail data. It is good practice to preserve the raw mail data for cases like this and for general archive recovering situations due to file corruption or other system failures.


v2.6.9 Notes

Attachment filename format change

Attachment filenames have changed from the numeric-style <ext><#####>.<ext> to <ext><XXXXXXXXXX>.<ext> where <XXXXXXXXXX> is a random string. For example, a jpeg image in the older format would have a filename like "jpg00001.jpg", and in the new style, it would be something like "jpgAOMySzCNIE.jpg".

The change should be transparent and was done to provide support for the ATTACHMENTDIR resource and as a performance enhancement. However, if you perform any custom post-processing on archives that depends on the old numeric-style format, you will need to take this change into account.

mhonarc::write_attachment: API change

mhonarc::write_attachment is the main routine for filters that save data to an external file. The signature of the routine was changed while fixing bug #5473. See the API appendix for more information.


v2.6.0 Notes

m2h_text_html::filter: default argument removed

The default argument for the m2h_text_plain::filter has been removed. The DEFCHARSET can be used instead.

SPAMMODE: Applies to message body text.

If SPAMMODE resource is enabled, it enables the new MODIFYBODYADDRESSES resource, which enables ADDRESSMODIFYCODE to rewrite addresses in message text bodies. If you prefer to not have addresses in message bodies modified when SPAMMODE is enabled, you must explicitly disable the MODIFYBODYADDRESSES resource.

readmail::MAILhead_get_disposition: API change.

The calling interface to readmail::MAILhead_get_disposition has been changed to the following:

($disp, $file, $raw, $html_name)  =
	      readmail::MAILhead_get_disposition($fields_hash_ref, $do_html);

The $file return value now has special, or invalid, filename characters converted to underscores.

The $do_html is optional. If a true value, $html_name will be returned as a representation of the filename suited for inclusion HTML and with character conversion processing done.

The $raw return value is the raw filename value as specified in the message header, which may include pathname components. This return value is mainly for informative reasons and it should not be used by filter code for security reasons.

The changes are backward compatible, but if you have written custom filters, you may want to use the new calling convention if you display the filename in the HTML generated.


General Notes

Japanese and MHonArc

Information on using MHonArc in a Japanese locale is available at the following location (documents in Japanese): <http://www.mhonarc.jp/>.

Auto-loaded URL attributes stripped in HTML messages

For v2.5, the default text/html filter (mhtxthtml.pl) will disable auto-loaded URL attributes for some HTML elements -- IMG, BODY, IFRAME, FRAME, OBJECT, SCRIPT, INPUT -- except for cid: URLs. This behavior can be disabled if the 'allownoncidurls' filter argument is specified.

The new behavior prevents malicious URLs being used to verify mail addresses, secretly setting cookies, or gather some statistical data without the explicit consent of the reader.

iso8859.pl deprecated

ISO-8859 character set data processing now defaults to using the MHonArc::CharEnt module in v2.5. The old iso8859.pl library is still provided for compatibility with older archives, and with v2.6, iso8859.pl directly invokes MHonArc::CharEnt.

To update archives to use the new settings, you can run the following command,

mha-dbedit -rcfile examples/def-mime.mrc \
	   -outdir /path/to/archive

where examples/def-mime.mrc represents the default MIME processing resources for MHonArc provided within the MHonArc distribution.

NOTE:

v2.5.4, and later, generated archives will automatically inherit new CHARSETCONVERTERS if the built-in defaults are being used. However, if you have defined CHARSETCONVERTERS for your archives, you will need to explicitly update your archives if you want the new settings applied to your archives.

TSLICE range setting

The value of the TSLICE resource is used to determine the number of messages to update, before and after by thread, of each new message added. To insure that messages within a thread slice are updated when a new message is added, make sure the before and after ranges specified for TSLICE is equal to the maximum-before and the maximum-after range arguments specifed in the uses of the $TSLICE$ resource variable. For example, if you have $TSLICE(0;4)$ and $TSLICE(3;3)$ in message layout resources, you should set TSLICE to 3:4.

If you only use $TSLICE$ once, it is best to set options for thread slice formatting via the TSLICE resource so you will not have anything to worry about.

MHonArc code under the mhonarc namespace

If upgrading from v2.1.x, or earlier, any custom filters you have developed may need to modified. If your filter accessed some main variables, your filter will not operate properly. All variables that used to be in package "main" are no longer. The major variables are now in package "mhonarc". For example, $::OUTDIR is now $mhonarc::OUTDIR. See the MIMEFILTERS resource page for more information.

HTMLEXT and MSGPREFIX usage warning

See the warnings in the documentation for the HTMLEXT and MSGPREFIX resources before using them.

Applying new MIMEFILTERS settings

Occasionally, a new release of MHonArc may contain new MIME filters. See the CHANGES file to check if any new filters have been added.

If you confirm that new filters have been added, and you want to apply them to your archives, you use the mha-dbedit program using the def-mime.mrc in the examples directory.

NOTE:

v2.5.4, and later, generated archives will automatically inherit new MIMEFILTERS if the built-in defaults are being used. However, if you have defined MIMEFILTERS for your archives, you will need to explicitly update your archives if you want the new settings applied to your archives.

Example usage of mha-dbedit:

mha-dbedit -rcfile examples/def-mime.mrc \
	   -outdir /path/to/archive

Change the -rcfile and -outdir pathnames to reflect where you are running mhonarc and where your archive is located, respectively.

Note, if your archives are using custom settings of MIMEFILTERS, MIMEARGS, and/or CHARSETCONVERTERS resources, you will need to create a variant version of def-mime.mrc (included in the examples directory) to include your settings and use the variant version when updating your archives.


[Prev]   [TOC][FAQ][Bugs][Home]   [Next]

$Date: 2005/07/11 00:13:53 $
MHonArc
Copyright © 1997-2005, Earl Hood, mhonarc@mhonarc.org