Markus, sorry about the confusion. I think i am bad at explaining what i am
trying to do. Your solution might be correct in its own right but it still
doesn't solve my problem.
By separating the templates for <HSDataContainerType> the code looks better.
I tried it earlier as well but it only puts the heading 'Output Description'
before my 'Outputs' in the TREE. I would like this heading to be in between
my target links at the bottom.
Attached below you will see both the XSL i wrote and the XML i am converting
to HTML. You will see that if you click on Input (up in the tree) you will
be taken down to where the inputs start. Same for Outputs. I would like to
put a heading 'Input Descriptions' at the very point the Inputs start. Same
for Outputs. This is the point where the link takes you.
Here is how i want the complete output:
------------------------------------------
Contract Name: myWebservice
ID: 25_610_15006485306
Start Date: Jul-23-2003
Inputs
textField_1
integerField_1
decimalField_1
DataContainer_1_1
textField_1_1
integerField_1_1
DataContainer_1_1_1
textField_1_1_1
integerField_1_1_1
Outputs
NoValueRestrictions
required
optional_NoDefault
optional_withDefault
TextValueRestrictions
restrictByValue
restrictByRange
restrictByRangeNoMIN
restrictByRangeNoMAX
restrictByPattern
NumberValueRestrictions
restrictByValue
restrictByRange
restrictByPattern
OtherRestrictions
BinaryRestrictions
Short Description:
This is an example of a complex set of inputs.
Long Description:
My way or the highway. My way or the highway. My way or the highway. My way
or the highway. My way or the highway. My way or the highway. My way or the
highway.
Descriptions
<-- this is where the inputs start, so put heading
'Input Description'
textField_1
Description: textField_1_Documentation
Required: No
Default Value: hello
The value must match the following pattern: None
integerField_1
Description: None
Required: Yes
Value Restrictions: None
decimalField_1
Description: None
Required: Yes
Value Restrictions: None
DataContainer_1_1/ textField_1_1
Description: None
Required: Yes
Value Restrictions: None
DataContainer_1_1/ integerField_1_1
Description: None
Required: Yes
Value Restrictions: None
DataContainer_1_1/ DataContainer_1_1_1/ textField_1_1_1
Description: None
Required: Yes
Value Restrictions: None
DataContainer_1_1/ DataContainer_1_1_1/ integerField_1_1_1
Description: None
Required: Yes
Value Restrictions: None
<-- this is where the outputs start, so put
heading 'Output Description'
NoValueRestrictions/ required
Description: None
Required: Yes
Value Restrictions: None
NoValueRestrictions/ optional_NoDefault
Description: None
Required: No
Default Value: None
Value Restrictions: None
NoValueRestrictions/ optional_withDefault
Description: None
Required: No
Default Value: This is the default value
Value Restrictions: None
TextValueRestrictions/ restrictByValue
Description: None
Required: Yes
Only the following values are allowed: CA; WA; VA;
TextValueRestrictions/ restrictByRange
Description: None
Required: Yes
Max Number of Characters: 0
Max Number of Characters: 100
TextValueRestrictions/ restrictByRangeNoMIN
Description: None
Required: Yes
Min Number of Characters: None
Max Number of Characters: 500
TextValueRestrictions/ restrictByRangeNoMAX
Description: None
Required: Yes
Max Number of Characters: 40
Min Number of Characters: None
TextValueRestrictions/ restrictByPattern
Description: None
Required: Yes
The value must match the following pattern: ^Pattern
NumberValueRestrictions/ restrictByValue
Description: None
Required: Yes
Only the following values are allowed: 10; 20; 30;
NumberValueRestrictions/ restrictByRange
Description: None
Required: Yes
The value must match the following pattern: None
NumberValueRestrictions/ restrictByPattern
Description: None
Required: Yes
The value must match the following pattern: $1234
--------------------------------------------------
So now when i click on Inputs (in the TREE up top), it should take me to
the point in the descriptions section where the inputs start i.e textField_1
It is doing that right now but there in NO HEADING THERE (above textFiele_1
in the desriptions). I would like to put a heading there (as poined by
arrows
in output) and take the user there when they click on 'Inputs'. Same for
Outputs.
i would recommend pasting both in an XSL editor such as Xselerator and then
looking at the generated HTML.
Any help on this would be appreciated. Thanks once again Markus.
John Liebermann
XSL:
---------------------------------------------------
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform";>
<xsl:template match="HSContract">
<html>
<head>
<title/>
</head>
<body>
<!--<p><a href="#desc"><b>Contract Name: </b><xsl:value-of
select="@contractName"/><br /></a>-->
<p><b>Contract Name: </b><xsl:value-of
select="@contractName"/><br />
<b>ID: </b><xsl:value-of select="@id"/><br />
<b>Start Date: </b><xsl:value-of select="@startDate"/><br /></p>
<xsl:apply-templates
select="HSDataContainerType[(_at_)name='Inputs']"/>
<xsl:apply-templates
select="HSDataContainerType[(_at_)name='Outputs']"/>
<xsl:apply-templates select="HSDocumentation"/>
<xsl:apply-templates select="//HSString | //HSDouble |
//HSInteger"
mode="target" />
</body>
</html>
</xsl:template>
<!-- if @name = Inputs, make it a link -->
<xsl:template match="HSDataContainerType[contains(@name, 'Inputs')]">
<img src="dcopenicon.gif">
<a href="#in"><b><xsl:value-of select="@name"/></b></a></img>
<div style="margin-left: 3em;">
<xsl:apply-templates select="*"/></div>
</xsl:template>
<xsl:template match="HSDataContainerType[contains(@name, 'Outputs')]">
<img src="dcopenicon.gif">
<a href="#out"><b><xsl:value-of select="@name"/></b></a></img>
<div style="margin-left: 3em;">
<xsl:apply-templates select="*"/></div>
</xsl:template>
<xsl:template match="HSDataContainerType">
<b><img src="dcopenicon.gif">
<xsl:value-of select="@name"/></img><br /></b>
<div style="margin-left: 3em;">
<xsl:apply-templates select="*"/></div>
</xsl:template>
<xsl:template name="Heading">
<b>Output Description</b><br />
</xsl:template>
<xsl:template match="*">
<div><xsl:apply-templates select="HSLinkString" /></div>
<div><xsl:apply-templates select="HSLinkDouble"/></div>
<div><xsl:apply-templates select="HSLinkInteger"/></div>
</xsl:template>
<xsl:template name="HSLinkString" match="//HSString">
<img src="texticon.gif"><a href="#{generate-id(.)}">
<xsl:value-of select="@name" /></a><br /></img>
</xsl:template>
<xsl:template name="HSLinkerString" match="HSString" mode="target">
<img src="texticon.gif"><a name="{generate-id(.)}">
<b><xsl:comment>Accessing the parent nodes...</xsl:comment>
<xsl:for-each select="ancestor::*">
<xsl:choose>
<xsl:when test="contains(@name, 'Inputs')">
<a name="in"></a>
</xsl:when>
<xsl:when test="contains(@name, 'Outputs') and
not(ancestor::*[contains(@name,'Outputs')])">
<!-- <xsl:call-template name="Heading" /> -->
<a name="out"></a>
<xsl:if test="contains(@name,
'Outputs')"></xsl:if>
</xsl:when>
<xsl:when test="contains(@name, 'Settings')">
<a name="set"></a>
</xsl:when>
<xsl:otherwise>
<xsl:if test="not(position()='1')">
<xsl:value-of select="@name" />/
</xsl:if>
</xsl:otherwise>
</xsl:choose>
</xsl:for-each>
<!-- neccessary to put the path to the field -->
<xsl:value-of select="@name" /></b></a></img>
<br />
<!-- Handle HSDocumentation in here -->
<xsl:text>Description: </xsl:text>
<xsl:choose>
<xsl:when test="normalize-space(HSDocumentation) = ''">
None<br />
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="HSDocumentation" /><br />
</xsl:otherwise>
</xsl:choose>
Required:
<xsl:choose>
<xsl:when test="contains(@required, 'true')">
Yes<br />
</xsl:when>
<!-- if optional, then default value exists or doesn't exist-->
<xsl:otherwise>No<br />
Default Value:
<!--if default tag has some value, display otherwise
say "No Default
Value"-->
<xsl:choose>
<xsl:when
test="normalize-space(DefaultValue) = ''">
None<br />
</xsl:when>
<xsl:otherwise>
<xsl:value-of
select="DefaultValue" /><br />
</xsl:otherwise>
</xsl:choose>
</xsl:otherwise>
</xsl:choose>
<xsl:choose>
<xsl:when test="contains(@restrictType, '1')">
<!-- if restrictType = 1 then display restrictions-->
Only the following values are allowed:
<xsl:for-each select="restrictedValue">
<xsl:value-of select="text()" />;
</xsl:for-each><br />
</xsl:when>
<xsl:when test="contains(@restrictType, '2')">
<xsl:for-each select="restrictedValue">
<xsl:choose>
<xsl:when
test="normalize-space( text() ) = ''">
Min Number of
Characters: <xsl:text>None</xsl:text><br />
</xsl:when>
<xsl:otherwise>
Max Number of
Characters: <xsl:value-of select="text()" /><br/>
</xsl:otherwise>
</xsl:choose>
</xsl:for-each>
</xsl:when>
<xsl:when test="contains(@restrictType, '3')">
<!-- if restrictType = 3 then say 'Pattern Allowed:'
value-->
<xsl:text>The value must match the following pattern:
</xsl:text>
<xsl:choose>
<!-- <xsl:when test="normalize-space(text()) =
''"> -->
<xsl:when test="restrictedValue[.='']">
<xsl:text>None</xsl:text><br />
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="restrictedValue"
/><br />
</xsl:otherwise>
</xsl:choose>
</xsl:when>
<xsl:otherwise>
Value Restrictions: None<br />
</xsl:otherwise>
</xsl:choose>
<br />
</xsl:template>
<xsl:template name="HSLinkDouble" match="//HSDouble">
<img src="decimalicon.gif"><a href="#{generate-id(.)}">
<xsl:value-of select="@name" /></a><br /></img>
</xsl:template>
<xsl:template name="HSLinkerDouble" match="HSDouble" mode="target">
<img src="decimalicon.gif"><a name="{generate-id(.)}">
<b> <xsl:comment>Accessing the parent nodes...</xsl:comment>
<xsl:for-each select="ancestor::*">
<xsl:choose>
<xsl:when test="contains(@name,
'Inputs')"></xsl:when>
<xsl:when test="contains(@name,
'Outputs')"></xsl:when>
<xsl:when test="contains(@name,
'Settings')"></xsl:when>
<xsl:otherwise>
<xsl:if test="not(position()='1')">
<xsl:value-of select="@name" />/
</xsl:if>
</xsl:otherwise>
</xsl:choose>
</xsl:for-each>
<xsl:value-of select="@name" /></b></a></img>
<br />
<!-- Handle HSDocumentation in here -->
<xsl:text>Description: </xsl:text>
<xsl:choose>
<xsl:when test="normalize-space(HSDocumentation) = ''">
None<br />
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="HSDocumentation" /><br />
</xsl:otherwise>
</xsl:choose>
Required:
<xsl:choose>
<xsl:when test="contains(@required, 'true')">
Yes<br />
</xsl:when>
<!-- if optional, then default value exists or doesn't exist-->
<xsl:otherwise>No<br />
Default Value:
<!--if default tag has some value, display otherwise
say "No Default
Value"-->
<xsl:choose>
<xsl:when
test="normalize-space(DefaultValue) = ''">
None<br />
</xsl:when>
<xsl:otherwise>
<xsl:value-of
select="DefaultValue" /><br />
</xsl:otherwise>
</xsl:choose>
</xsl:otherwise>
</xsl:choose>
<xsl:choose>
<xsl:when test="contains(@restrictType, '1')">
<!-- if restrictType = 1 then display restrictions-->
Only the following values are allowed:
<xsl:for-each select="restrictedValue">
<xsl:value-of select="text()" />;
</xsl:for-each><br />
</xsl:when>
<xsl:when test="contains(@restrictType, '2')">
<xsl:for-each select="restrictedValue">
<xsl:choose>
<xsl:when
test="normalize-space( text() ) = ''">
Min Value Allowed:
<xsl:text>None</xsl:text><br />
</xsl:when>
<xsl:otherwise>
Max Value Allowed:
<xsl:value-of select="text()" /><br/>
</xsl:otherwise>
</xsl:choose>
</xsl:for-each>
</xsl:when>
<xsl:when test="contains(@restrictType, '3')">
<!-- if restrictType = 3 then say 'Pattern Allowed:'
value-->
<xsl:text>The value must match the following pattern:
</xsl:text>
<xsl:choose>
<!-- <xsl:when test="normalize-space(text()) =
''"> -->
<xsl:when test="restrictedValue[.='']">
<xsl:text>None</xsl:text><br />
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="restrictedValue"
/><br />
</xsl:otherwise>
</xsl:choose>
</xsl:when>
<xsl:otherwise>
Value Restrictions: None<br />
</xsl:otherwise>
</xsl:choose>
<br />
</xsl:template>
<xsl:template name="HSLinkInteger" match="//HSInteger">
<img src="integericon.gif"><a href="#{generate-id(.)}">
<xsl:value-of select="@name" /></a><br /></img>
</xsl:template>
<xsl:template name="HSLinkerInteger" match="HSInteger" mode="target">
<img src="integericon.gif"><a name="{generate-id(.)}">
<b> <xsl:comment>Accessing the parent nodes...</xsl:comment>
<xsl:for-each select="ancestor::*">
<xsl:choose>
<xsl:when test="contains(@name,
'Inputs')"></xsl:when>
<xsl:when test="contains(@name,
'Outputs')"></xsl:when>
<xsl:when test="contains(@name,
'Settings')"></xsl:when>
<xsl:otherwise>
<xsl:if test="not(position()='1')">
<xsl:value-of select="@name" />/
</xsl:if>
</xsl:otherwise>
</xsl:choose>
</xsl:for-each>
<xsl:value-of select="@name" /></b></a></img>
<br />
<!-- Handle HSDocumentation in here -->
<xsl:text>Description: </xsl:text>
<xsl:choose>
<xsl:when test="normalize-space(HSDocumentation) = ''">
None<br />
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="HSDocumentation" /><br />
</xsl:otherwise>
</xsl:choose>
Required:
<xsl:choose>
<xsl:when test="contains(@required, 'true')">
Yes<br />
</xsl:when>
<!-- if optional, then default value exists or doesn't exist-->
<xsl:otherwise>No<br />
Default Value:
<!--if default tag has some value, display otherwise
say "No Default
Value"-->
<xsl:choose>
<xsl:when
test="normalize-space(DefaultValue) = ''">
None<br />
</xsl:when>
<xsl:otherwise>
<xsl:value-of
select="DefaultValue" /><br />
</xsl:otherwise>
</xsl:choose>
</xsl:otherwise>
</xsl:choose>
<xsl:choose>
<xsl:when test="contains(@restrictType, '1')">
<!-- if restrictType = 1 then display restrictions-->
Only the following values are allowed:
<xsl:for-each select="restrictedValue">
<xsl:value-of select="text()" />;
</xsl:for-each><br />
</xsl:when>
<xsl:when test="contains(@restrictType, '2')">
<xsl:for-each select="restrictedValue">
<xsl:choose>
<xsl:when
test="normalize-space( text() ) = ''">
Min Value Allowed:
<xsl:text>None</xsl:text><br />
</xsl:when>
<xsl:otherwise>
Max Value Allowed:
<xsl:value-of select="text()" /><br/>
</xsl:otherwise>
</xsl:choose>
</xsl:for-each>
</xsl:when>
<xsl:when test="contains(@restrictType, '3')">
<!-- if restrictType = 3 then say 'Pattern Allowed:'
value-->
<xsl:text>The value must match the following pattern:
</xsl:text>
<xsl:choose>
<!-- <xsl:when test="normalize-space(text()) =
''"> -->
<xsl:when test="restrictedValue[.='']">
<xsl:text>None</xsl:text><br />
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="restrictedValue"
/><br />
</xsl:otherwise>
</xsl:choose>
</xsl:when>
<xsl:otherwise>
Value Restrictions: None<br />
</xsl:otherwise>
</xsl:choose>
<br />
</xsl:template>
<xsl:template name="HSDoc" match="HSDocumentation">
<p><b>Short Description: </b><br /><br />
<xsl:apply-templates select="shortDescription" /><br /><br />
<b>Long Description:</b><br /><br />
<xsl:apply-templates select="descriptionSection" /></p>
</xsl:template>
<xsl:template name="shortDescription" match="//shortDescription">
<xsl:value-of select="text()"/>
</xsl:template>
<xsl:template name= "descriptionSection" match="//descriptionSection">
<xsl:value-of select="text()"/><br /><br />
<p><b>Descriptions</b></p>
<!-- <p><b><a name="in">Input Descriptions</a></b></p> -->
</xsl:template>
</xsl:stylesheet>
----------------------------------------
<HSContract contractCategory="2" contractName="myWebservice"
contractType="3" expirationDate="Jun-23-2013" id="25_610_15006485306"
limitMaxConcurrentThreads="false" logEnabled="true" maxConcurrentThreads="2"
revision="25_33" runBatchInParallel="false" startDate="Jul-23-2003">
<imagePath />
<HSDataContainerType list="true" name="Inputs" required="true"
revision=""
systype="true">
<HSString name="textField_1" restrictType="3" xmlNodeType="1">
<DefaultValue>hello</DefaultValue>
<HSDocumentation>
<shortDescription><![CDATA[
textField_1_Documentation]]></shortDescription>
</HSDocumentation>
<restrictedValue />
</HSString>
<HSInteger name="integerField_1" required="true"
xmlNodeType="1" />
<HSDouble name="decimalField_1" required="true" xmlNodeType="1"
/>
<HSDataContainerType name="DataContainer_1_1" required="true"
revision="">
<HSString name="textField_1_1" required="true"
xmlNodeType="1" />
<HSInteger name="integerField_1_1" required="true"
xmlNodeType="1" />
<HSDataContainerType name="DataContainer_1_1_1"
required="true"
revision="">
<HSString name="textField_1_1_1"
required="true" xmlNodeType="1" />
<HSInteger name="integerField_1_1_1"
required="true" xmlNodeType="1" />
</HSDataContainerType>
</HSDataContainerType>
</HSDataContainerType>
<HSDataContainerType list="true" name="Outputs" required="true"
revision=""
systype="true">
<HSDataContainerType name="NoValueRestrictions" required="true"
revision="">
<HSString name="required" required="true"
xmlNodeType="1" />
<HSString name="optional_NoDefault" xmlNodeType="1">
<DefaultValue />
</HSString>
<HSString name="optional_withDefault" xmlNodeType="1">
<DefaultValue>This is the default
value</DefaultValue>
</HSString>
</HSDataContainerType>
<HSDataContainerType name="TextValueRestrictions"
required="true"
revision="">
<HSString name="restrictByValue" required="true"
restrictType="1"
xmlNodeType="1">
<restrictedValue>CA</restrictedValue>
<restrictedValue>WA</restrictedValue>
<restrictedValue>VA</restrictedValue>
</HSString>
<HSString name="restrictByRange" required="true"
restrictType="2"
xmlNodeType="1">
<restrictedValue>0</restrictedValue>
<restrictedValue>100</restrictedValue>
</HSString>
<HSString name="restrictByRangeNoMIN" required="true"
restrictType="2"
xmlNodeType="1">
<restrictedValue />
<restrictedValue>500</restrictedValue>
</HSString>
<HSString name="restrictByRangeNoMAX" required="true"
restrictType="2"
xmlNodeType="1">
<restrictedValue>40</restrictedValue>
<restrictedValue />
</HSString>
<HSString name="restrictByPattern" required="true"
restrictType="3"
xmlNodeType="1">
<restrictedValue>^Pattern</restrictedValue>
</HSString>
</HSDataContainerType>
<HSDataContainerType name="NumberValueRestrictions"
required="true"
revision="">
<HSInteger name="restrictByValue" required="true"
restrictType="1"
xmlNodeType="1">
<restrictedValue>10</restrictedValue>
<restrictedValue>20</restrictedValue>
<restrictedValue>30</restrictedValue>
</HSInteger>
<HSInteger name="restrictByRange" required="true"
restrictType="3"
xmlNodeType="1">
<restrictedValue />
</HSInteger>
<HSInteger name="restrictByPattern" required="true"
restrictType="3"
xmlNodeType="1">
<restrictedValue>$1234</restrictedValue>
</HSInteger>
</HSDataContainerType>
<HSDataContainerType name="OtherRestrictions" required="true"
revision="">
</HSDataContainerType>
<HSDataContainerType name="BinaryRestrictions" required="true"
revision="">
</HSDataContainerType>
</HSDataContainerType>
<HSDocumentation>
<shortDescription><![CDATA[ This is an example of a complex set
of inputs.
]]></shortDescription>
<descriptionSection title="myWebserviceDesc"><![CDATA[ My way
or the
highway. My way or the highway. My way or the highway. My way or the
highway. My way or the highway. My way or the highway. My way or the
highway.
]]></descriptionSection>
<returnCodeDescription code="" />
</HSDocumentation>
</HSContract>
----------------------------------------------------------------
-----Original Message-----
From: owner-xsl-list(_at_)lists(_dot_)mulberrytech(_dot_)com
[mailto:owner-xsl-list(_at_)lists(_dot_)mulberrytech(_dot_)com]On Behalf Of
Markus Abt
Sent: Thursday, July 17, 2003 6:58 AM
To: 'xsl-list(_at_)lists(_dot_)mulberrytech(_dot_)com'
Subject: AW: [xsl] can't display heading in between fields...pls. help
John,
it's hard to help you without knowing the relevant structure of your
XML input, and all relevant parts of your style sheet.
1.
So I have to guess for the Input XML:
- your XML tree contains only one <HSDataContainerType name="Inputs">
- your XML tree contains only one <HSDataContainerType name="Outputs">
- "Inputs" and "Outputs" are siblings, at least not contained in each other
The XML part you posted in one of your recent mails contained only one
"Outputs" and no "Inputs", so I can't tell, if the above is true.
If it is true then it should be very simple to do.
2.
For your XSL, I guess:
What you are trying to do is:
For every field type <HSString>, <HSDecimal>, <HSInteger>, etc.:
- write a template which outputs the field properties.
- if it is the first "Inputs" or "Outputs" field, regardless of the type,
print the {In|Out}put Descriptions heading.
This seems to be a complicated solution to me. You have to copy
(or call) the code to do this in every type's template.
Better:
Your stylesheet contains some code which looks roughly like:
<xsl:apply-templates select="HSDataContainerType"/>
and which is responsible for processing the "Inputs" and "Outputs"
Container Types. How does it look like in your stylesheet?
(i.e. there may be a mode attribute)
If you found it, change it to (roughly:)
<h5><a name="in">Input Description</a></h5>
<xsl:apply-templates select="HSDataContainerType[(_at_)name='Inputs']"/>
<h5><a name="out">Output Description</a></h5>
<xsl:apply-templates select="HSDataContainerType[(_at_)name='Outputs']"/>
You can use your tests "[contains(@name, 'Inputs')]" if nescessary.
You may also output the description headings only if there exist at least
input/output field, resp. The easiest way to do this is write templates for
HSDataContainerType[(_at_)name='***puts'] and put the heading there,
but you may also do a simple
<xsl:if test="HSDataContainerType[(_at_)name='***puts']"> around the above.
The logic behind is:
"Find the part in your XML input which corresponds to the
wanted description heading on HTML output."
This is not the first "Input" field.
It is the <HSDataContainerType name="Inputs"> element.
Hope this helps. I fear that I can't help you more without exact
knowledge of your XML structure (see [1.] above) and all relevant parts
of your stylesheet (not only the templates but also how they are
applied or called).
Regards,
Markus
__________________________
Markus Abt
Comet Computer GmbH
http://www.comet.de
----------
Von: John Liebermann
Gesendet: Mittwoch, 16. Juli 2003 23:19
An: xsl-list(_at_)lists(_dot_)mulberrytech(_dot_)com
Betreff: [xsl] can't display heading in between fields...pls. help
[...]
The highlighted 'Output Description' above is displayed during all times
where there is a <HSString> which has an ancestor 'Output'. I want this to
be displayed ONLY once.
So, what i can't figure out is how to be able to display a heading in
between the descriptions (as marked on the output above). Thank you all for
your help.
Regards,
John
XSL-List info and archive: http://www.mulberrytech.com/xsl/xsl-list
XSL-List info and archive: http://www.mulberrytech.com/xsl/xsl-list
XSL-List info and archive: http://www.mulberrytech.com/xsl/xsl-list