Yes, this is what I thought as well. But exclude-result-prefixes doesn't
accomplish this with my current config.
I'm going to switch over to Xalan and test it there to see if Saxon and
Xalan behave differently in respect to this case.
-Mark
Michael Kay wrote:
Thanks for the idea, but it didn't change the behavior, the
result still
looks like this:
<?xml version="1.0" encoding="utf-8"?>
<codeBook xmlns="http://www.icpsr.umich.edu/DDI">
<docDscr xmlns:ddi="http://www.icpsr.umich.edu/DDI">
<citation>
<titlStmt>...
Now you do have a namespace declaration in the result which is not being
used, and is only there because it was in scope for the literal result
element that created it. This *is* the situation where
exclude-result-prefixes works.
Michael Kay
Markus Abt wrote:
Mark,
try to put the namespace node at the root element of the result,
not at xsl:stylesheet:
<?xml version="1.0" encoding="iso-8859-1"?>
<xsl:stylesheet
version="1.0"
xmlns:ddi="http://www.icpsr.umich.edu/DDI"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
>
<xsl:template match="ddi:codeBook">
<xsl:copy xmlns="http://www.icpsr.umich.edu/DDI">
<xsl:apply-templates select="@*"/>
<docDscr>
<citation>
<titlStmt>
<titl>
<xsl:value-of
select="ddi:stdyDscr/ddi:citation/ddi:titlStmt/ddi:titl"/>
</titl>
</titlStmt>
</citation>
</docDscr>
<xsl:apply-templates select="*"/>
</xsl:copy>
</xsl:template>
</xsl:stylesheet>
Regards,
Markus
__________________________
Markus Abt
Comet Computer GmbH
http://www.comet.de
----------
Von: Mark R. Diggory
Gesendet: Freitag, 22. August 2003 17:33
An: xsl-list(_at_)lists(_dot_)mulberrytech(_dot_)com
Betreff: Re: [xsl] exclude result prefixes doesn't stop
prefix from showingup.
I did see that particular Q/A in the XSL FAQ and in your
book, I agree
it works, but I feel like its a bit of an overkill
Initially I had tried to write the stylesheet using the DDI
namespace
as
the default namespace, like below. but this failed to
detect the default
namespace in the source document so none of the source
elements were
properly matched. I thought to myself, there should be some
way I can
match the default namespace in the source document? But I
can't find
anything that does this. I came across the #default entity,
but this
doesn't seem to fit either.
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet
version="1.0"
xmlns="http://www.icpsr.umich.edu/DDI"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
exclude-result-prefixes="ddi"
>
<xsl:template match="codeBook">
<xsl:copy>
<xsl:apply-templates select="@*"/>
<docDscr>
...
<titl>
<xsl:value-of
select="stdyDscr/citation/titlStmt/titl"/>
</titl>
...
</docDscr>
<xsl:apply-templates select="*"/>
</xsl:copy>
</xsl:template>
...
</xsl:stylesheet>
Michael Kay wrote:
exclude-result-prefixes only affects the namespaces copied from the
stylesheet by a literal result element, it doesn't affect
copying of
namespaces from source documents. In any case, the codeBook
element is
in the namespace http://www.icpsr.umich.edu/DDI, so the
namespace must
be declared. exclude-result-prefixes only suppresses
namespaces that
are not used in any element or attribute name, and this
namespace is
used. What you want to do is not to suppress the namespace
declaration, it is to change the name of the element, which
you can do
by using <xsl:element name="{local-name(.)}"> in place of xsl:copy.
Michael Kay
-----Original Message-----
From: owner-xsl-list(_at_)lists(_dot_)mulberrytech(_dot_)com
[mailto:owner-xsl-list(_at_)lists(_dot_)mulberrytech(_dot_)com] On Behalf Of
Mark R. Diggory
Sent: 21 August 2003 23:10
To: xsl-list(_at_)lists(_dot_)mulberrytech(_dot_)com
Subject: [xsl] exclude result prefixes doesn't stop prefix
from showing up.
I have a stylesheet that copies an xml document with a
default namespace
while it also is adding some content to it:
*The stylesheet*
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet
version="1.0"
xmlns="http://www.icpsr.umich.edu/DDI"
xmlns:ddi="http://www.icpsr.umich.edu/DDI"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
exclude-result-prefixes="ddi"
>
<xsl:template match="@* | *">
<xsl:copy>
<xsl:apply-templates select="* | @* | text()"/>
</xsl:copy>
</xsl:template>
<xsl:template match="ddi:codeBook">
<xsl:copy>
<xsl:apply-templates select="@*"/>
<docDscr>
<citation>
<titlStmt>
<titl>
<xsl:value-of
select="ddi:stdyDscr/ddi:citation/ddi:titlStmt/ddi:titl"/>
</titl>
</titlStmt>
</citation>
</docDscr>
<xsl:apply-templates select="*"/>
</xsl:copy>
</xsl:template>
</xsl:stylesheet>
*The xml document*
<?xml version="1.0" encoding="utf-8"?>
<codeBook xmlns="http://www.icpsr.umich.edu/DDI" >
<stdyDscr> ....
*the resulting xml document*
<?xml version="1.0" encoding="utf-8"?>
<codeBook xmlns="http://www.icpsr.umich.edu/DDI">
<docDscr xmlns:ddi="http://www.icpsr.umich.edu/DDI">
<citation>
...
</citation>
</docDscr>
<stdyDscr>
<citation>
<titlStmt>
<titl>Foo bar</titl>
</titlStmt>
</citation>
</stdyDscr>
</codeBook>
My problem is that I'm getting an extra
xmlns:ddi="http://www.icpsr.umich.edu/DDI" in the docDscr
element even
though I'm suppressing it in the excludes. Is there any way I
can stop
this from happening?
-Mark Diggory
Harvard MIT Data Center
XSL-List info and archive:
http://www.mulberrytech.com/xsl/xsl-list
XSL-List info and archive: http://www.mulberrytech.com/xsl/xsl-list
XSL-List info and archive:
http://www.mulberrytech.com/xsl/xsl-list
XSL-List
info and archive: http://www.mulberrytech.com/xsl/xsl-list
XSL-List info and archive: http://www.mulberrytech.com/xsl/xsl-list
XSL-List info and archive: http://www.mulberrytech.com/xsl/xsl-list
XSL-List info and archive: http://www.mulberrytech.com/xsl/xsl-list