I still need to see what you expect the output to be. Your stylesheet may or
may not be a good place to start solving the problem. Until the expected output
has been defined there is no way to determine that.
--
Charles Knell
cknell(_at_)onebox(_dot_)com - email
-----Original Message-----
From: Bovy, Stephen J <STEPHEN(_dot_)Bovy(_at_)ca(_dot_)com>
Sent: Fri, 20 May 2005 14:07:36 -0400
To: <xsl-list(_at_)lists(_dot_)mulberrytech(_dot_)com>
Subject: RE: RE: [xsl] creating frames with xsl without javascript
(client-side with xml link and implicit style sheet)
I am using client side implicit stylesheet processing.
I have a link to an xml doc which points to a style sheet the link has a
target frame.
Here is my style-sheet:
<?xml version="1.0" ?>
<xsl:stylesheet version="1.0"
xmlns="http://www.w3.org/1999/xhtml"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="xml" version="1.0" indent="yes"
doctype-public="-//W3C//DTD XHTML 1.0 Strict//EN"
doctype-system="http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"/>
<xsl:template match="/">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>
<xsl:value-of select="local-name(/*)"/>
</title>
</head>
<body>
<xsl:apply-templates/>
</body>
</html>
</xsl:template>
<xsl:template match="/*">
<a name="tb1" />
<table border="1" width="100%" cellpadding="5" >
<thead >
<tr bordercolor="yellow" bgcolor="Aqua">
<th colspan="4" >
<xsl:value-of select="local-name(/*)"/>
</th>
</tr>
<tr bordercolor="yellow" bgcolor="#00CCFF">
<xsl:apply-templates select="/*/* 1 /*" mode="header"/>
</tr>
</thead>
<tbody >
<xsl:apply-templates />
</tbody>
</table>
<iframe id="fm1" frameborder="0" vspace="0" hspace="0"
marginwidth="0" marginheight="0" width="100%"
src="#tb1" />
</xsl:template>
<xsl:template match="/*/*" >
<tr bordercolor="yellow" bgcolor="silver">
<xsl:apply-templates />
</tr>
</xsl:template>
<xsl:template match="/*/*/*" mode="header">
<th> <xsl:value-of select="local-name()"/> </th>
</xsl:template>
<xsl:template match="/*/*/*" >
<td align="center"> <xsl:value-of select="."/> </td>
</xsl:template>
</xsl:stylesheet>
The above style sheet was created provided with the help of this list.
Here is a sample of my xml
<?xml version="1.0" ?>
<?xml-stylesheet type="text/xsl"
href="'INTRAHCS.HTML.XML3(TEST3L)'" ?>
<DETACCT-XML-DOCUMENT
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation=
"'INTRAHCS.HTML.XML3(TEST3S)'" >
<XML-TABLE-ROW>
<ACCTCODE>BO</ACCTCODE>
<ACCOUNT>8006547</ACCOUNT>
<NAME>TORRES,ERNESTO</NAME>
<ARFILE.BALANCE> 44.99</ARFILE.BALANCE>
</XML-TABLE-ROW>
</DETACCT-XML-DOCUMENT>
The file name syntax is ibm z/os datasets do not let it disturb you.
My Link looks like this:
<A HREF="'INTRAHCS.HTML.XML3(TEST3)'" TARGET="body">
DETACCT-XML-DOCUMENT </A>
The only thing I have changed in the above style sheet is
I added <a name="tb1" />
and I added the <iframe> ...
My ultimate objective is to try in as simple a way as possible to enable
the
body of my table to scroll separate from the header portion of the
table.
I thought I might try using a div to make the table or portions of the
table
invisible. And then display said portions in separate iframes.
But it seems like even in the above example my rel ref in the iframe
does not work.
src="#tb1"
-----Original Message-----
From: cknell(_at_)onebox(_dot_)com [mailto:cknell(_at_)onebox(_dot_)com]
Sent: Friday, May 20, 2005 3 :04 AM
To: xsl-list(_at_)lists(_dot_)mulberrytech(_dot_)com
Subject: RE: RE: [xsl] creating frames with xsl without javascript
I was just making a small joke at your expense because a question such
as yours cannot be effectively answered without more information. It is
the kind of question that is often asked on the list and the standard
answer is:
1) Supply a sample of the XML document that is to be transformed.
2) Supply a sample of the desired output document (in this case it
appears that you want to generate HTML, although you didn't say so
explicitly).
Armed with these two pieces of information, someone on the list can show
you what needs to be done. Without this information, any answer someone
could supply is likely to be terse (as mine was), impossibly convoluted
(because it will be too general and therefor vague), or we will have to
make up our own input and output, which may be hard for you to map over
to your problem domain.
I'll be busy until this afternoon (EDT), so if you supply this
information and no one has provided guidance before then, I'll take a
look at it later today.
--
Charles Knell
cknell(_at_)onebox(_dot_)com - email
-----Original Message-----
From: Bovy, Stephen J <STEPHEN(_dot_)Bovy(_at_)ca(_dot_)com>
Sent: Thu, 19 May 2005 19:47:03 -0400
To: <xsl-list(_at_)lists(_dot_)mulberrytech(_dot_)com>
Subject: RE: [xsl] creating frames with xsl without javascript
How about a clue please
the frame element requires a url,
how can I fill or set the contents of the frame element ???
-----Original Message-----
From: cknell(_at_)onebox(_dot_)com [mailto:cknell(_at_)onebox(_dot_)com]
Sent: Thursday, May 19, 2005 3:31 PM
To: xsl-list(_at_)lists(_dot_)mulberrytech(_dot_)com
Subject: RE: [xsl] creating frames with xsl without javascript
Yes.
--
Charles Knell
cknell(_at_)onebox(_dot_)com - email
-----Original Message-----
From: Bovy, Stephen J <STEPHEN(_dot_)Bovy(_at_)ca(_dot_)com>
Sent: Thu, 19 May 2005 18:01:10 -0400
To: <xsl-list(_at_)lists(_dot_)mulberrytech(_dot_)com>
Subject: [xsl] creating frames with xsl without javascript
I would like to use xsl to create several frames in
my doc, I would like to populate one frame with
part of my xml, and the other with the other part.
And I do not want to use any java script,
can it be done ?????
--~------------------------------------------------------------------
XSL-List info and archive: http://www.mulberrytech.com/xsl/xsl-list
To unsubscribe, go to: http://lists.mulberrytech.com/xsl-list/
or e-mail: <mailto:xsl-list-unsubscribe(_at_)lists(_dot_)mulberrytech(_dot_)com>
--~--
--~------------------------------------------------------------------
XSL-List info and archive: http://www.mulberrytech.com/xsl/xsl-list
To unsubscribe, go to: http://lists.mulberrytech.com/xsl-list/
or e-mail: <mailto:xsl-list-unsubscribe(_at_)lists(_dot_)mulberrytech(_dot_)com>
--~--
--~------------------------------------------------------------------
XSL-List info and archive: http://www.mulberrytech.com/xsl/xsl-list
To unsubscribe, go to: http://lists.mulberrytech.com/xsl-list/
or e-mail: <mailto:xsl-list-unsubscribe(_at_)lists(_dot_)mulberrytech(_dot_)com>
--~--
--~------------------------------------------------------------------
XSL-List info and archive: http://www.mulberrytech.com/xsl/xsl-list
To unsubscribe, go to: http://lists.mulberrytech.com/xsl-list/
or e-mail: <mailto:xsl-list-unsubscribe(_at_)lists(_dot_)mulberrytech(_dot_)com>
--~--
--~------------------------------------------------------------------
XSL-List info and archive: http://www.mulberrytech.com/xsl/xsl-list
To unsubscribe, go to: http://lists.mulberrytech.com/xsl-list/
or e-mail: <mailto:xsl-list-unsubscribe(_at_)lists(_dot_)mulberrytech(_dot_)com>
--~--
--~------------------------------------------------------------------
XSL-List info and archive: http://www.mulberrytech.com/xsl/xsl-list
To unsubscribe, go to: http://lists.mulberrytech.com/xsl-list/
or e-mail: <mailto:xsl-list-unsubscribe(_at_)lists(_dot_)mulberrytech(_dot_)com>
--~--