Michael, Martin,
Thank you both for your replies.
I knew the text() entries were not necessary but I'd left them in for clarity
(*). I had missed (ie not realized) the issue about string-values, comments,
etc.
Martin, both of your versions gave "Ambiguous rule match".
Michael, having fixed one minor error, a spurious extra ')' immediately before
the final ']', I found that your version also gave "Ambiguous rule match".
On giving a priority of 1 to the simpler filter and 2 to all your various
suggestions I am now finding it is working and giving the result I want (ie all
three options work).
Was the ambiguous rule match because both are just classed as having a filter,
and the rule selection doesn't care that one has a more complex filter than the
other?
I had sort of realized that I was doing a join, though as I have very little
experience of database work I hadn't thought to use the term.
I am using Saxon 9.8.0.3 so XSL 2 is fine. I think 3 would be too but I only
have experience as far as 2.
So thank you both, I am now able to get the results that I need.
Regards,
Richard.
(*) clarity in the sense that although it was more verbose I thought it made my
intent clearer.
[Blue line]
Richard Kerry
BNCS Engineer, SI SOL Telco & Media Vertical Practice
T: +44 (0)20 3618 2669
M: +44 (0)7812 325518
4 Triton Square, Regent’s Place, London NW1 3HG
richard(_dot_)kerry(_at_)atos(_dot_)net<https://webmail.siemens-it-solutions.com/owa/redir.aspx?C=9fb20d019e3e4cb99344d708709a3177&URL=mailto%3arichard.kerry%40atos.net>
[Atos logo]
This e-mail and the documents attached are confidential and intended solely for
the addressee; it may also be privileged. If you receive this e-mail in error,
please notify the sender immediately and destroy it. As its integrity cannot be
secured on the Internet, the Atos group liability cannot be triggered for the
message content. Although the sender endeavours to maintain a computer
virus-free network, the sender does not warrant that this transmission is
virus-free and will not be liable for any damages resulting from any virus
transmitted.
________________________________
From: Michael Kay mike(_at_)saxonica(_dot_)com
<xsl-list-service(_at_)lists(_dot_)mulberrytech(_dot_)com>
Sent: 17 January 2018 16:29
To: xsl-list(_at_)lists(_dot_)mulberrytech(_dot_)com
Subject: Re: [xsl] Nested filters, or filter too complicated.
You're trying to do a join. That involves comparing items from two different
sets.
In SQL (and in mathematical predicate logic) you do this by binding "range
variables" to the items in each set, and then using predicates such as
where X.ref = Y.id
You can use the same approach in XSLT, but with caveats. Only with XSLT 3.0 are
you allowed to bind variables within an XPath expression. But that's where "."
and "current() come in. Within a predicate, "." is used as an implicit range
variable for the set you are filtering. You can also sometimes use "current()"
as your second range variable. Or you can bind variables explicitly using
xsl:variable. The problem about using ".", however, is that it changes its
meaning in a nested predicate.
In this case in XSLT 2.0 upwards, current() rescues you:
match="type[.='Action'][$data/device-description/param[@name=current()/../base-name]/@standard='no')]
"
(Note I've avoided the use of text() here. It's much better to compare with the
string-value of the element, rather than with its text nodes - it will continue
to work, for example, if the text is split up by comments).
XSLT 2.0 defines that current() within a pattern refers to the node being
tested against the pattern. Unfortunately though (IIRC), XSLT 1.0 didn't allow
use of current() in patterns. But no-one is still using XSLT 1.0, are they???
Michael Kay
Saxonica
On 17 Jan 2018, at 15:19, Kerry, Richard
richard(_dot_)kerry(_at_)atos(_dot_)net<mailto:richard(_dot_)kerry(_at_)atos(_dot_)net>
<xsl-list-service(_at_)lists(_dot_)mulberrytech(_dot_)com<mailto:xsl-list-service(_at_)lists(_dot_)mulberrytech(_dot_)com>>
wrote:
I am trying to use XSLT to process one XML file, which refers to data in
another, and I am having trouble with getting a filter to work.
The first source file (device.xml) - the one that is actually processed by the
XSL - has entries like this:
<device-description>
<device-value>
<base-name>PollNow</base-name>
<name>Poll Now</name>
<type>Action</type>
</device-value>
<device-value>
<base-name>StartupPollNow</base-name>
<name>Startup Poll Now</name>
<type>Action</type>
</device-value>
<device-value>
<base-name>Ping</base-name>
<name>Ping</name>
<type minimum-length="0" maximum-length="256" >String</type>
</device-value>
</device-description>
One of the templates is approximately as follows:
<x:template match="type[text()='Action']" >
<!-- do basic action. -->
</x:template>
This quite happily matches all the <device_name> elements where the <type> has
a text value pf "Action".
However, I have a second XML file (device-3.xml) which contains some data that
I wish to use to modify the behaviour of the transform. It has entries like
this:
<device-description>
<param name="PollNow" standard="no" >
<name>Poll Now</name>
<description>normal poll</description>
</param>
<param name="StartupPollNow" standard="no" >
<name>Startup Poll Now</name>
<description>startup poll</description>
</param>
<param name="Ping">
<name>Ping</name>
<description>Ping-Pong</description>
</param>
</device-description>
The second file is accessed via a variable, as follows:
<x:variable name="data" select="document($in-file-3)"/>
What I want to achieve is that for all <type> elements where there is a
corresponding <param> where base-name is the same as param/@name, I want a
different action.
The additional template I have for this is currently as follows
<x:template
match="type[text()='Action'][$data/device-description/param[@name=../base-name/text()]/@standard='no')]
" >
<!-- do different action. -->
</x:template>
My thinking is that the first filter is as with the first template I listed,
matching all <type> elements whose text is "Action".
The second filter should then enable me to pick the right param from the second
file, and do something based on the value of its @standard.
Maybe once I'm in the second filter I am causing confusion as to which element
the @name refers to (which should be the param) and which the ../base-name is
relative to (the device-value/type)?
Can I do all this within a single template's @match ? Or am I making it too
complicated. In which case how might I get the result I'm looking for?
Appreciatively,
Richard.
The examples are all slightly simplified from the real data, which has more
elements, and the transforms are in a mode.
Richard Kerry
BNCS Engineer, SI SOL Telco & Media Vertical Practice
T: +44 (0)20 3618 2669
M: +44 (0)7812 325518
4 Triton Square, Regent’s Place, London NW1 3HG
richard(_dot_)kerry(_at_)atos(_dot_)net<https://webmail.siemens-it-solutions.com/owa/redir.aspx?C=9fb20d019e3e4cb99344d708709a3177&URL=mailto%3arichard.kerry%40atos.net>
[Atos logo]
This e-mail and the documents attached are confidential and intended solely for
the addressee; it may also be privileged. If you receive this e-mail in error,
please notify the sender immediately and destroy it. As its integrity cannot be
secured on the Internet, the Atos group liability cannot be triggered for the
message content. Although the sender endeavours to maintain a computer
virus-free network, the sender does not warrant that this transmission is
virus-free and will not be liable for any damages resulting from any virus
transmitted.
Atos, Atos Consulting, Worldline and Canopy The Open Cloud Company are trading
names used by the Atos group. The following trading entities are registered in
England and Wales: Atos IT Services UK Limited (registered number 01245534),
Atos Consulting Limited (registered number 04312380), Atos Worldline UK Limited
(registered number 08514184) and Canopy The Open Cloud Company Limited
(registration number 08011902). The registered office for each is at 4 Triton
Square, Regent’s Place, London, NW1 3HG.The VAT No. for each is: GB232327983.
This e-mail and the documents attached are confidential and intended solely for
the addressee, and may contain confidential or privileged information. If you
receive this e-mail in error, you are not authorised to copy, disclose, use or
retain it. Please notify the sender immediately and delete this email from your
systems. As emails may be intercepted, amended or lost, they are not secure.
Atos therefore can accept no liability for any errors or their content.
Although Atos endeavours to maintain a virus-free network, we do not warrant
that this transmission is virus-free and can accept no liability for any
damages resulting from any virus transmitted. The risks are deemed to be
accepted by everyone who communicates with Atos by email.
XSL-List info and archive<http://www.mulberrytech.com/xsl/xsl-list>
EasyUnsubscribe<-list/293509> (by email)
XSL-List info and archive<http://www.mulberrytech.com/xsl/xsl-list>
EasyUnsubscribe<-list/2528992> (by email<>)
Atos, Atos Consulting, Worldline and Canopy The Open Cloud Company are trading
names used by the Atos group. The following trading entities are registered in
England and Wales: Atos IT Services UK Limited (registered number 01245534),
Atos Consulting Limited (registered number 04312380), Atos Worldline UK Limited
(registered number 08514184) and Canopy The Open Cloud Company Limited
(registration number 08011902). The registered office for each is at 4 Triton
Square, Regent’s Place, London, NW1 3HG.The VAT No. for each is: GB232327983.
This e-mail and the documents attached are confidential and intended solely for
the addressee, and may contain confidential or privileged information. If you
receive this e-mail in error, you are not authorised to copy, disclose, use or
retain it. Please notify the sender immediately and delete this email from your
systems. As emails may be intercepted, amended or lost, they are not secure.
Atos therefore can accept no liability for any errors or their content.
Although Atos endeavours to maintain a virus-free network, we do not warrant
that this transmission is virus-free and can accept no liability for any
damages resulting from any virus transmitted. The risks are deemed to be
accepted by everyone who communicates with Atos by email.
--~----------------------------------------------------------------
XSL-List info and archive: http://www.mulberrytech.com/xsl/xsl-list
EasyUnsubscribe: http://lists.mulberrytech.com/unsub/xsl-list/1167547
or by email: xsl-list-unsub(_at_)lists(_dot_)mulberrytech(_dot_)com
--~--