|
Re: [xsl] How do you code value-of select to specify one field per line but you do not want each specified field to jump to a new output line
2014-10-28 15:13:54
If you use an XSLT 2.0 processor I would simply use
<xsl:value-of select="foo, bar, baz" seperator=", "/> instead of all the separate value-ofs.
Or you need to use
<xsl:value-of select="foo"/>
<xsl:text>' </xsl:text>
--
Diese Nachricht wurde von meinem Android Mobiltelefon mit GMX Mail gesendet.
"Catherine Wilbur cwilbur(_at_)uwindsor(_dot_)ca" <xsl-list-service(_at_)lists(_dot_)mulberrytech(_dot_)com>schrieb:
How do I code the value-of select so all my output fields stay on the same output line. Do not want to wrap all my value-of logic on one line because then it is too hard to format my output fields.
Here is code and output. How do I fix the code so I have one field per line but the output all stays on one line. I look thru each fund_info item and print out a data line with specific fields.
XSL Code
<?xml version="1.0" encoding="UTF-8" ?>
<!-- New document created with EditiX at Thu Oct 23 16:28:34 EDT 2014 -->
<xsl:stylesheet version="2.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:fn="http://www.w3.org/2005/xpath-functions"
xmlns:xdt="http://www.w3.org/2005/xpath-datatypes"
xmlns:err="http://www.w3.org/2005/xqt-errors"
exclude-result-prefixes="xs xdt err fn">
<xsl:output method="text" indent="no"/>
<!-- OUSTANDING OUTPUT DATA ISSUES -->
<!-- xsl:value-of select="../../../../../vendor_FinancialSys_Code" />, need to check for zero or nil then use 99999 otherwise take the value -->
<!-- xsl:value-of select="../../../../../hardcode_RemarkString" />, derived field -->
<!-- xsl:value-of select="../../../../../hardcode_GLDate" />, current date in format yyyymmdd -->
<!-- xsl:value-of select="../../../../../hardcode_BatchNo" />, format yyyymmddhhmmXCUR where X is value from Line Owner (L-Leddy, W-Law), CUR is from invoice_amount/currency, yyyymmddhhmm is current date -->
<!-- xsl:value-of select="../../../../../hardcode_PayTerms" />, derived from part of invoice/invoice_number -->
<!-- xsl:value-of select="../../../../../hardcode_Attachments" />, derived from part of invoice/invoice_number -->
<xsl:template match="/">
<xsl:for-each select="payment_data/invoice_list/invoice/invoice_line_list/invoice_line/fund_info_list/fund_info/amount">
<xsl:value-of select="../../../../../invoice_number" />,
<xsl:value-of select="../../../../../invoice_amount/sum" />,
<xsl:value-of select="../../../../../invoice_amount/currency" />,
<xsl:value-of select="../../../../../vendor_code" />,
<xsl:value-of select="../../../../../unique_identifier" />,
<xsl:value-of select="../../../../../invoice_date" />,
<xsl:value-of select="../../../../../payment_method" />,
<xsl:value-of select="../../../../../invoice_exchange_rate_list/exchange_rate/rate" />,
<xsl:value-of select="sum" />,
<xsl:value-of select="../fiscal_period" />,
<xsl:value-of select="../external_id" />,
<xsl:value-of select="../../../../invoice_line/po_line_info/po_line_owner" />
<xsl:text>
</xsl:text>
</xsl:for-each>
</xsl:template>
</xsl:stylesheet>
Output displays as shown below
PO-305,
22,
USD,
ABE,
2014082450002181,
07/24/2014,
ACCOUNTINGDEPARTMENT,
1.0742,
20,
2014-2015,
18105.8820,
Leddy Library*
If I change the code above section to following
<xsl:template match="/">
<xsl:for-each select="payment_data/invoice_list/invoice/invoice_line_list/invoice_line/fund_info_list/fund_info/amount">
<xsl:value-of select="../../../../../invoice_number" />, <xsl:value-of select="../../../../../invoice_amount/sum" />, <xsl:value-of select="../../../../../invoice_amount/currency" />, <xsl:value-of select="../../../../../vendor_code" />, <xsl:value-of select="../../../../../unique_identifier" />, <xsl:value-of select="../../../../../invoice_date" />, <xsl:value-of select="../../../../../payment_method" />, <xsl:value-of select="../../../../../invoice_exchange_rate_list/exchange_rate/rate" />, <xsl:value-of select="sum" />, <xsl:value-of select="../fiscal_period" />, <xsl:value-of select="../external_id" />, <xsl:value-of select="../../../../invoice_line/po_line_info/po_line_owner" />
<xsl:text>
</xsl:text>
</xsl:for-each>
Output then displays as shown below (this is how data should appear)
PO-305, 22, USD, ABE, 2014082450002181, 07/24/2014, ACCOUNTINGDEPARTMENT, 1.0742, 20, 2014-2015, 18105.8820, Leddy Library*
_____________________________________________________________________
Catherine Wilbur | Senior Application Programmer | IT Services
401 Sunset Avenue, Windsor ON Canada N9B 3P4
(T) 519.253.3000 Ext. 2745 | (F) 519.973.7083 | (E) cwilbur(_at_)uwindsor(_dot_)ca
www.uwindsor.ca/its
From: Catherine Wilbur/cwilbur/University of Windsor
To: xsl-list(_at_)lists(_dot_)mulberrytech(_dot_)com
Date: 10/24/2014 04:51 PM
Subject: Code used to extract data from complex XML file - how do you move fields value of select fields to separate lines
About a week ago I posted information about a complex XML file I was trying to convert to CSV. I have since come up with the following XML stylesheet.
Have some questions about how to tweak this stylesheet. Had to start at the recurring section then move upwards to build the CSV file.
O/S Issues
1) Extracted all default fields from XML file using my XSLT code below.
2) How can I put each value-of select on separate lines in my code so is easier to read - do not want my data to go to a different line.
3) How do you edit value-of select lines to make a value a date, numeric, zero filled.
4) How do I sort file after all records get written out to file in XSLT code
4) Have to find a way to derive some of my fields that do not come directly from my XML file
how do I hardcode a value
how do a pull in a default value into a field such as current date in format yyyymmddhhmm or yyyymmdd
how do I set up a field from different fields (ie. my batch date format is as follows YYYYMMDDHHMMXCUR where X is a value from another field and CUR is a value from another field
how do I look for a partial value in a text field from XML file to set up a derived field - need to look for a certain string in invoice_number to set up PaymentTerms
Here is my CSV output from XML File (was able to extract all default fields)
PO-305, 22, USD, ABE, 2014082450002181, 07/24/2014, ACCOUNTINGDEPARTMENT, 1.0742, 20, 2014-2015,18105.8820,Leddy Library*
PO-305, 22, USD, ABE, 2014082450002181, 07/24/2014, ACCOUNTINGDEPARTMENT, 1.0742, 2, 2014-2015,18105.8430,Leddy Library*
XSLT Code
<?xml version="1.0" encoding="UTF-8" ?>
<!-- New document created with EditiX at Thu Oct 23 16:28:34 EDT 2014 -->
<xsl:stylesheet version="2.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:fn="http://www.w3.org/2005/xpath-functions"
xmlns:xdt="http://www.w3.org/2005/xpath-datatypes"
xmlns:err="http://www.w3.org/2005/xqt-errors"
exclude-result-prefixes="xs xdt err fn">
<xsl:output method="text" indent="no"/>
<!-- OUSTANDING OUTPUT DATA ISSUES -->
<!-- xsl:value-of select="../../../../../vendor_FinancialSys_Code" />, need to check for zero or nil then use 99999 otherwise take the value -->
<!-- xsl:value-of select="../../../../../hardcode_RemarkString" />, derived field -->
<!-- xsl:value-of select="../../../../../hardcode_GLDate" />, current date in format yyyymmdd -->
<!-- xsl:value-of select="../../../../../hardcode_BatchNo" />, seormat yyyymmddhhmmXCUR where X is value from Line Owner (L-Leddy, W-Law), CUR is from invoice_amount/currency, yyyymmddhhmm is current date -->
<!-- xsl:value-of select="../../../../../hardcode_PayTerms" />, erived from part of invoice/invoice_number -->
<xsl:template match="/">
<xsl:text>
</xsl:text>
<xsl:for-each select="payment_data/invoice_list/invoice/invoice_line_list/invoice_line/fund_info_list/fund_info/amount">
<xsl:value-of select="../../../../../invoice_number" />, <xsl:value-of select="../../../../../invoice_amount/sum" />, <xsl:value-of select="../../../../../invoice_amount/currency" />, <xsl:value-of select="../../../../../vendor_code" />, <xsl:value-of select="../../../../../unique_identifier" />, <xsl:value-of select="../../../../../invoice_date" />, <xsl:value-of select="../../../../../payment_method" />, <xsl:value-of select="../../../../../invoice_exchange_rate_list/exchange_rate/rate" />, <xsl:value-of select="sum" />, <xsl:value-of select="../fiscal_period" />,<xsl:value-of select="../external_id" />,<xsl:value-of select="../../../../invoice_line/po_line_info/po_line_owner" />
<xsl:text>
</xsl:text>
</xsl:for-each>
</xsl:template>
</xsl:stylesheet>
_____________________________________________________________________
Catherine Wilbur | Senior Application Programmer | IT Services
401 Sunset Avenue, Windsor ON Canada N9B 3P4
(T) 519.253.3000 Ext. 2745 | (F) 519.973.7083 | (E) cwilbur(_at_)uwindsor(_dot_)ca
www.uwindsor.ca/its
|
|