hi all,
found solution to my problem, my mails were looping back to the sender
saying
<first(_at_)test(_dot_)cnpl(_dot_)co(_dot_)in>:
This message is looping: it already has my Delivered-To line. (#5.4.6)
i had to make some changes in .fetchmailrc file, removed ``:'' (colon)
envelope "Delivered-To"
and added
dropdelivered
now its working fine, here is my running .fetchmailrc file
set postmaster "postmaster(_at_)test(_dot_)cnpl(_dot_)co(_dot_)in"
set no bouncemail
set no spambounce
set properties ""
set logfile /var/log/fetchmail
poll 203.199.107.48 with proto POP3 and options no dns
aka test.cnpl.co.in
envelope "Delivered-To"
user 'catchall(_at_)test(_dot_)cnpl(_dot_)co(_dot_)in' there with
password 'secret'
is * here options fetchall
smtphost localhost
smtpaddress test.cnpl.co.in
forcecr
dropdelivered
-sanjeev
----- Original Message -----
From: "Sanjeev" <sanjeev(_at_)cnpl(_dot_)co(_dot_)in>
To: "Charles Cazabon" <qmail(_at_)discworld(_dot_)dyndns(_dot_)org>
Cc: <qmail(_at_)list(_dot_)cr(_dot_)yp(_dot_)to>
Sent: Wednesday, September 11, 2002 4:26 PM
Subject: Re: Mail Looping Problem with Delivered-To header
Monday, Charles Cazabon wrote:
Sanjeev <sanjeev(_at_)cnpl(_dot_)co(_dot_)in> wrote:
[...]
# .fetchmailrc
poll ISPIPAddress with proto POP3 and options no dns
aka myfqdn
ISPIPAddress? myfqdn? Sorry, we can't help you unless you give us the
/real/
names and IP addresses involved, the unedited output of qmail-showctl,
and the
complete log entries leading up to the bounce.
Charles
hi,
hope Charles, gets complete information from my side
here are my fetchmailrc, qmail log, qmail-showctl (o/p),
in this example its,
mail from, user1(_at_)test(_dot_)cnpl(_dot_)co(_dot_)in
to, first(_at_)test(_dot_)cnpl(_dot_)co(_dot_)in
wwoutgoing and incoming mails are send to
sanjeev(_at_)test(_dot_)cnpl(_dot_)co(_dot_)in
############# this is my fetchmailrc file v #############
set postmaster "postmaster(_at_)test(_dot_)cnpl(_dot_)co(_dot_)in"
set no bouncemail
set no spambounce
set properties ""
set logfile /var/log/fetchmail
poll 203.199.107.48 with proto POP3 and options no dns
aka test.cnpl.co.in
envelope "Delivered-To:"
user 'catchall(_at_)test(_dot_)cnpl(_dot_)co(_dot_)in' there with password
'secret' is * here
options fetchall
smtphost localhost
smtpaddress test.cnpl.co.in
forcecr
############# above is my fetchmailrc file ^ #############
############# this is my qmail log v #####################
@400000003d7ecdd10e22d7d4 new msg 87719
@400000003d7ecdd10e2331ac info msg 87719: bytes 1181 from
<user1(_at_)test(_dot_)cnpl(_dot_)co(_dot_)in> qp 1660 uid 505
@400000003d7ecdd110e81254 starting delivery 33: msg 87719 to local
sanjeev(_at_)test(_dot_)cnpl(_dot_)co(_dot_)in
@400000003d7ecdd110e8839c status: local 1/10 remote 0/20
@400000003d7ecdd110fbf814 starting delivery 34: msg 87719 to local
first(_at_)test(_dot_)cnpl(_dot_)co(_dot_)in
@400000003d7ecdd110fc3a7c status: local 2/10 remote 0/20
@400000003d7ecdd51678c114 delivery 33: success: did_1+0+0/
@400000003d7ecdd5167926a4 status: local 1/10 remote 0/20
@400000003d7ecdd516d14d0c delivery 34: failure:
This_message_is_looping:_it_already_has_my_Delivered-To_line._(#5.4.6)/
@400000003d7ecdd516f65584 status: local 0/10 remote 0/20
@400000003d7ecdd51ba5a4f4 bounce msg 87719 qp 1665
@400000003d7ecdd51ba60e6c end msg 87719
@400000003d7ecdd51bbaea44 new msg 87693
@400000003d7ecdd51bc0d5e4 info msg 87693: bytes 1863 from <> qp 1665 uid
507
@400000003d7ecdd51d6bf1bc starting delivery 35: msg 87693 to local
sanjeev(_at_)test(_dot_)cnpl(_dot_)co(_dot_)in
@400000003d7ecdd51d6eeb74 status: local 1/10 remote 0/20
@400000003d7ecdd51d88ef9c starting delivery 36: msg 87693 to local
user1(_at_)test(_dot_)cnpl(_dot_)co(_dot_)in
@400000003d7ecdd51d8be184 status: local 2/10 remote 0/20
@400000003d7ecdde0371bc9c delivery 35: success: did_1+0+0/
@400000003d7ecdde0372222c status: local 1/10 remote 0/20
@400000003d7ecdde078550dc delivery 36: success: did_1+0+0/
@400000003d7ecdde0785b284 status: local 0/10 remote 0/20
@400000003d7ecdde0785c60c end msg 87693
############# above is my qmail log ^ #####################
############# this is my output of qmail-showctl v #####################
qmail home directory: /var/qmail.
user-ext delimiter: -.
paternalism (in decimal): 2.
silent concurrency limit: 500.
subdirectory split: 23.
user ids: 501, 502, 503, 0, 504, 505, 506, 507.
group ids: 501, 502.
me: My name is test.cnpl.co.in
ldapserver: My ldap server is localhost
badmailfrom: (Default.) Any MAIL FROM is allowed.
bouncefrom: (Default.) Bounce user name is MAILER-DAEMON.
bouncehost: (Default.) Bounce host name is test.cnpl.co.in.
concurrencylocal: (Default.) Local concurrency is 10.
concurrencyremote: (Default.) Remote concurrency is 20.
databytes: (Default.) SMTP DATA limit is 0 bytes.
defaultdomain: Default domain name is cnpl.co.in.
defaulthost: (Default.) Default host name is test.cnpl.co.in.
doublebouncehost: (Default.) 2B recipient host: test.cnpl.co.in.
doublebounceto: (Default.) 2B recipient user: postmaster.
envnoathost: (Default.) Presumed domain name is test.cnpl.co.in.
helohost: (Default.) SMTP client HELO host name is test.cnpl.co.in.
idhost: (Default.) Message-ID host name is test.cnpl.co.in.
localiphost: (Default.) Local IP address becomes test.cnpl.co.in.
locals:
Messages for test.cnpl.co.in are delivered locally.
Messages for san.test.cnpl.co.in are delivered locally.
me: My name is test.cnpl.co.in.
percenthack: (Default.) The percent hack is not allowed.
plusdomain: Plus domain name is .
qmqpservers: (Default.) No QMQP servers.
queuelifetime: (Default.) Message lifetime in the queue is 604800 seconds.
rcpthosts:
SMTP clients may send messages to recipients at test.cnpl.co.in.
morercpthosts: (Default.) No effect.
morercpthosts.cdb: (Default.) No effect.
smtpgreeting: (Default.) SMTP greeting: 220 test.cnpl.co.in.
smtproutes: (Default.) No artificial SMTP routes.
timeoutconnect: (Default.) SMTP client connection timeout is 60 seconds.
timeoutremote: (Default.) SMTP client data timeout is 1200 seconds.
timeoutsmtpd: (Default.) SMTP server data timeout is 1200 seconds.
virtualdomains:
now the qmail-ldap specific files
ldapserver: My LDAP Server is localhost.
ldapbasedn: LDAP basedn: o=localhost,c=com.
ldaplogin: LDAP login: cn=qmail,o=localhost,c=com.
ldappassword: LDAP password: qmailsecret.
ldapuid: Default UID is: 600.
ldapgid: Default GID is: 600.
ldapmessagestore: Prefix for non absolute paths: .
ldapdefaultdotmode: (Default.) Default dot mode for ldap users: not
defined.
ldapdefaultquota: Default quota for ldap users: 2000000S, 1001C.
dirmaker: Location of program to create homedirs:
/var/qmail/bin/custom_dirmaker.
ldaplocaldelivery: local passwd lookup is 0 (1 = on, 0 = off).
ldaprebind: ldap rebinding is 1 (1 = on, 0 = off).
ldapcluster: (Default.) clustering is 0 (1 = on, 0 = off).
ldapclusterhosts: (Default.) No alternate MailHosts for clustering listed.
quotawarning:
############# above is my output of qmail-showctl ^ #####################
You are about to be over your quota. Clean your mailbox
custombouncetext:
You have experienced some sort of problem delivering mail to us.
Please contact us at for more information.
maxrcptcount: (Default.) 0 RCPT TOs are accepted before sending 553 (0 =
off).
tarpitcount: (Default.) 0 RCPT TOs are accepted before tarpitting (0 =
off).
tarpitdelay: (Default.) 5 seconds of delay to introduce after each
subsequent RCPT TO.
badrcptto:
relaymailfrom:
Envelope senders allowed to relay: @test.cnpl.co.in.
rbllist: (Default.) No RBL listed.
rbltags: (Default.) No RBL listed.
holdremote: I have no idea what this file does.
concurrencyincoming: I have no idea what this file does.
defaultdelivery: I have no idea what this file does.
relaymailfrom: I have no idea what this file does.
regards
sanjeev