-----Original Message-----
From: Kulwinder Atwal
Sent: Friday, February 09, 2001 7:03 PM
To: 'zeroconf(_at_)merit(_dot_)edu'; seamoby(_at_)cdma-2000(_dot_)org;
MOBILE-IP(_at_)STANDARDS(_dot_)NORTELNETWORKS(_dot_)COM;
'srvloc(_at_)srvloc(_dot_)org';
'aaa-wg(_at_)merit(_dot_)edu'; 'manet(_at_)itd(_dot_)nrl(_dot_)navy(_dot_)mil';
'ipsec(_at_)lists(_dot_)tislabs(_dot_)com';
'ipsec-policy(_at_)vpnc(_dot_)org'; 'ietf-ipsra(_at_)vpnc(_dot_)org';
'ietf-sacred(_at_)imc(_dot_)org';
'enum(_at_)ietf(_dot_)org';
'sigtran(_at_)standards(_dot_)nortelnetworks(_dot_)com';
'ietf(_at_)ietf(_dot_)org'; 'IETF-Announce(_at_)ietf(_dot_)org';
'BLUETOOTH-BOF(_at_)mailbag(_dot_)cps(_dot_)intel(_dot_)com'
Cc: 'Thomas Narten'; Akers Ron-WRA001
Subject: BOF: IP over Bluetooth for 50th Meeting of IETF.
Myself and Ron Akers have requested an IP over Bluetooth BOF for the 50th
Meeting of the IETF in Minneapolis. The BOF will discuss the creation of a
IETF Working Group to investigate the most open and efficient way to place
IP over the Bluetooth Host Controller.
Current work in this area within the Bluetooth SIG concentrates on defining
IP over a set of other lower-layer stacks. Currently there are two options
defined by the Bluetoth SIG:
Option 1: IP/PPP/RFCOM/L2CAP/Host Controller
Option 2: IP/PAN Profile/L2CAP/Host Controller
(where the PAN Profile is a Bluetooth SIG work in progress)
We are proposing that the IETF form a WG to define a more efficient way of
running IP over Bluetooth. In particular, IP would run
over an IETF protocol over the Host Controller without L2CAP. This option
may be adopted by the Bluetooth SIG at a later date as a Profile. Since all
Bluetooth SIG Profiles are optional, a customer may choose any combination
of Profiles in a final product. Further, since Bluetooth Working Groups
have it in their mandate to adopt protocols from other standards making
bodies such as the IETF, there exists a clear path for IETF work to be
adopted by the Bluetooth SIG.
Whereas the last BOF was informational only and organized by the Bluetooth
SIG itself, the objective of this BOF will be to foster innovation, and
speed progress by placing IP related protocol development within the IETF
and Bluetooth-specific protocol development
within the Bluetooth SIG, by developing an IP over Bluetooth IETF Working
Group.
This effort will define its own way of running IP over Bluetooth, by
carefully selecting a set of Bluetooth protocols (freely available from
published specifications at
http://www.bluetooth.com/developer/specification/specification.asp) on which
to build IP.
Please join myself, Kulwinder Atwal, and Ron Akers on the pre-BOF mailing
list:
This site runs version 2.0.1 of the "Mailman" list manager.
The following describes commands you can send to get
information about, and control your subscription to the lists at
this site. Note that much of the following can also be
accomplished via the World Wide Web, at:
http://internet.motlabs.com/mailman/listinfo/bluetooth
In particular, you can use the Web site to have your password sent to
your delivery address.
Email commands can be in the subject line or in the body
of the message. The commands should be set to the following address:
<bluetooth-request(_at_)internet(_dot_)motlabs(_dot_)com>
About the descriptions - words in "<>"s signify REQUIRED items and
words in "[]" denote OPTIONAL items. Do not include the "<>"s or
"[]"s when you use the commands.
The following commands are valid:
subscribe [password] [digest-option] [address=<address>]
Subscribe to the mailing list. Your password must be given to
unsubscribe or change your options. When you subscribe to the
list, you'll be reminded of your password periodically.
'digest-option' may be either: 'nodigest' or 'digest' (no
quotes!) If you wish to subscribe an address other than the
address you send this request from, you may specify
"address=<email address>" (no brackets around the email
address, no quotes!)
unsubscribe <password> [address]
Unsubscribe from the mailing list. Your password must match
the one you gave when you subscribed. If you are trying to
unsubscribe from a different address than the one you
subscribed from, you may specify it in the 'address' field.
who
See everyone who is on this mailing list.
info
View the introductory information for this list.
lists
See what mailing lists are run by this Mailman server.
help
This message.
set <option> <on|off> <password>
Turn on or off list options. Valid options are:
ack:
Turn this on to receive acknowledgement mail when you send
mail to the list.
digest:
Receive mail from the list bundled together instead of one
post at a time.
plain:
Get plain-text, not MIME-compliant, digests (only if
digest is set)
nomail:
Stop delivering mail. Useful if you plan on taking a
short vacation.
norcv:
Turn this on to NOT receive posts you send to the list.
Does not work if digest is set.
hide:
Conceals your address when people look at who is on this
list.
options
Show the current values of your list options.
password <oldpassword> <newpassword>
Change your list password.
end or --
Stop processing commands (good to do if your mailer
automatically adds a signature file - it'll save you from a lot
of cruft).
Commands should be sent to
bluetooth-request(_at_)internet(_dot_)motlabs(_dot_)com
Questions and concerns for the attention of a person should be sent to
bluetooth-admin(_at_)internet(_dot_)motlabs(_dot_)com
Kulwinder Atwal
Bluetooth Design
Zucotto Wireless Inc.
kulwinder(_dot_)atwal(_at_)zucotto(_dot_)com
------------------------------------------------------------
Ron Akers Voice :(847)576-7928
Networks and Infrastructure Research FAX :(847)576-3240
Motorola Laboratories email:ron(_dot_)akers(_at_)motorola(_dot_)com
1301 Algonquin Rd, Rm 2246
Schaumburg, IL. 60196
------------------------------------------------------------