last call comment:
Following items should be considered
1) hdsl2ShdslMaintPowerBack.does not support "disable" value
which is required in our implementation .
2) Line Probe - this feature is referred to in ITU-T G.991.2 as PMMS
(Power Measurement Modulation Session).
An objcet should be added to support this feature.
Suggested object for line probe:
hdsl2ShdslSpanConfLineProbeEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable (2),
enable (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object enables/disables support for Line Probe
of the units in a SHDSL line . When Line Probe is
enabled,
the system performs Line Probing to find the best
possible rate.
If Line probe is disabled, rate adaptation phase is
skipped,
to shorten set up time."
::= { hdsl2ShdslSpanConfProfileEntry 15 }
Thanks,
Yig'al Hachmon
RAD Data Communications LTD.