ietf
[Top] [All Lists]

Re: [NSIS] Last Call: draft-ietf-nsis-rmd (RMD-QOSM - The Resource Management in Diffserv QOS Model) to Experimental RFC

2010-03-02 17:06:37
Hi Jerry

We will include in the Appendix a similar example as the one given in
Section 3.4 of the QSPEC draft.

Best regards,
Georgios

On 3/2/2010, "Gerald Ash" <gash5107(_at_)yahoo(_dot_)com> wrote:

One more comment:
 
Section 3.1 of the QSPEC draft 
http://tools.ietf.org/html/draft-ietf-nsis-qspec-24#section-3.1 lists 
requirements for QOSM specifications including "QNE processing rules 
describing how QSPEC information is treated and interpreted"and "at least one 
bit-level QSPEC example".
 
While the RMD draft has examples in Appendix A of individual processing 
functions, there is no overall, end-to-end example given of QSPEC composition 
and processing from QNI to QNR and back again.  IMO this would greatly help an 
overall understanding of RMD functionality.
 
Such QSPEC processing examples are given in Sections 4.4 ("Processing 
Example") and 4.5 ("Bit-Level QSPEC Example") of the Y.1541-QOSM draft 
(http://tools.ietf.org/html/draft-ietf-nsis-y1541-qosm-10#section-4.4)
and
Section 3.4 ("Example of QSPEC Processing") of the QSPEC draft 
(http://toolsietf.org/html/draft-ietf-nsis-qspec-24#section-3.4).
 
Thanks,
Jerry

--- On Mon, 3/1/10, Gerald Ash <gash5107(_at_)yahoo(_dot_)com> wrote:


From: Gerald Ash <gash5107(_at_)yahoo(_dot_)com>
Subject: Re: [NSIS] Last Call: draft-ietf-nsis-rmd (RMD-QOSM - The Resource 
Management in Diffserv QOS Model) to Experimental RFC
To: ietf(_at_)ietf(_dot_)org, nsis(_at_)ietf(_dot_)org
Cc: "Jerry Ash" <gash5107(_at_)yahoo(_dot_)com>
Date: Monday, March 1, 2010, 2:20 PM







Minor editorial comments:
 
1. page 35:
"  the "Peak Data Rate-1 (p)" value of the <Bandwdith> parameter.
   When the QNE edges use aggregated intra-domain QoS-NSLP operational
   states, then the "Peak Data Rate-1 (p)" value of the <Bandwdith>"
substitute <TMOD-1> for <Bandwdith> 
 
2. page 101:
"  directions by using the procedure described in Section 4.6.2.3 and
   including in the  <Bandwith> parameter within the "RMD-QOSM QOS
   Description" field carried by the "forward" intra-domain RESERVE the"
substitute <TMOD-1> for <Bandwith>
 
Thanks,
Jerry


--- On Mon, 3/1/10, The IESG <iesg-secretary(_at_)ietf(_dot_)org> wrote:


From: The IESG <iesg-secretary(_at_)ietf(_dot_)org>
Subject: [NSIS] Last Call: draft-ietf-nsis-rmd (RMD-QOSM - The Resource 
Management in Diffserv QOS Model) to Experimental RFC
To: "IETF-Announce" <ietf-announce(_at_)ietf(_dot_)org>
Cc: nsis(_at_)ietf(_dot_)org
Date: Monday, March 1, 2010, 9:38 AM


The IESG has received a request from the Next Steps in Signaling WG 
(nsis) to consider the following document:

- 'RMD-QOSM - The Resource Management in Diffserv QOS Model '
   <draft-ietf-nsis-rmd-16.txt> as an Experimental RFC

The IESG plans to make a decision in the next few weeks, and solicits
final comments on this action.  Please send substantive comments to the
ietf(_at_)ietf(_dot_)org mailing lists by 2010-03-22. Exceptionally, 
comments may be sent to iesg(_at_)ietf(_dot_)org instead. In either case, 
please 
retain the beginning of the Subject line to allow automated sorting.

The file can be obtained via
http://www.ietf.org/internet-drafts/draft-ietf-nsis-rmd-16.txt


IESG discussion can be tracked via
https://datatracker.ietf.org/public/pidtracker.cgi?command=view_id&dTag=12558&rfc_flag=0

_______________________________________________
nsis mailing list
nsis(_at_)ietf(_dot_)org
https://www.ietf.org/mailman/listinfo/nsis




     )
_______________________________________________
Ietf mailing list
Ietf(_at_)ietf(_dot_)org
https://www.ietf.org/mailman/listinfo/ietf

<Prev in Thread] Current Thread [Next in Thread>