ietf
[Top] [All Lists]

Re: [NSIS] Last Call: draft-ietf-nsis-rmd (RMD-QOSM - The Resource Management in Diffserv QOS Model) to Experimental RFC

2010-03-23 10:46:10
Hi Jerry


In my opinion the required bit example format is already
specified in Section 4.1.
I do not think that it is usefull to duplicate the information that
is already givel elsewhere and copy it into this section.

Regarding the bit level format example, what we are willing to do
is to inlcude the following text in the Appendix A.6, instead of copying
figures from elsewhere.


"The bit level format of the RMD-QSpec is given in Section 4.1. In
particular, The Initiator/Local QSPEC bit, i.e., <I> is set to "Local"
(i.e.,
   "1") and the <Qspec Proc> is set as follows:
   * Message Sequence = 0: Sender initiated
   * Object combination = 0: <QoS Desired> for RESERVE and
     <QoS Reserved> for RESPONSE

 The <QSPEC Version> used by RMD-QOSM is the default version, i.e.,
 "0", see [QSP-T]. The <QSPEC Type> value used by the RMD-QOSM is
 specified in [QSP-T] and is equal to: "2".
 The <Traffic Handling Directives> contains the following fields:

 <Traffic Handling Directives> = <PHR container> <PDR container>


 The Per Hop Reservation container (PHR container) and
 the Per Domain Reservation container (PDR container) are specified
 in Section 4.1.2 and 4.1.3, respectively. The <PHR container>
 contains the traffic handling directives for intra-domain
 communication and reservation.  The <PDR container> contains
 additional traffic handling directives that is needed for
 edge-to-edge communication. The RMD-QOSM <QoS Desired> and
<QoS Reserved>, are specified in  Section 4.1.1.
In RMD-QOSM the <QoS Desired> and <QoS Reserved> objects contain the
following parameters:

 <QoS Desired> = <TMOD-1> <PHB Class> <Admission Priority>
 <QoS Reserved> = <TMOD-1> <PHB Class> <Admission Priority>

 The bit format of the <PHB Class> (see [QSP-T] and Figure 4 and
 Figure 5) and <Admission Priority> complies to the bit format
 specified in [QSP-T].

 Note that for this example the RMD reservation is established without an
 <Admission Priority> parameter, which is equivalent to a reservation
 established with an <Admission Priority> whose value is 1."


Best regards,
Georgios

On 3/22/2010, "Gerald Ash" <gash5107(_at_)yahoo(_dot_)com> wrote:

Georgios,
 
I think it would be good to also include a bit-level example of the RMD-QSPEC, 
such as given in Section 4.5 of the Y.1541-QOSM draft 
(http://tools.ietf.org/html/draft-ietf-nsis-y1541-qosm-10#section-4.5).  For 
one thing, the QSPEC specification requires "at least one bit-level QSPEC 
example" be given for all QOSM specifications (see Section 3.1 in 
http://tools.ietf.org/html/draft-ietf-nsis-qspec-24#section-3.1).  
Furthermore, an RMD-QSPEC example would add clarity to the RMD-QOSM 
specification and not be very difficult to include IMO.
 
Thanks,
Jerry



     )
_______________________________________________
Ietf mailing list
Ietf(_at_)ietf(_dot_)org
https://www.ietf.org/mailman/listinfo/ietf

<Prev in Thread] Current Thread [Next in Thread>