Yah, Cisco tech support is usually pretty decent. I'd try them...
____________________________________________________________________________
* TRAICOVN ----------------------------------- http://www.traicovn.com *
----------------------------------------------------------------------------
On Thu, 12 Jul 2001, Ari Ollikainen wrote:
At 6:00 PM -0700 7/12/01,
Lorenzo_Boffelli_at_AT-ITALY(_at_)smtpgwy(_dot_)alliedtelesyn(_dot_)com
(Lorenz wrote:
I need to configure Cisco 2600 like a MGCP Gateway.
I use the configuration file listed at the end of the mail.
The Call Agent can receive the RSIP message and respond with ACK.
After, the Call Agent send AUEP message but CISCO responds with an error.
CISCO 2600 --> CA
RSIP 1 *(_at_)Router MGCP 0.1
RM: restart
CA --> CISCO 2600
200 1 OK
CA --> CISCO 2600
AUEP 135 *(_at_)Router MGCP 0.1
CISCO 2600 --> CA
510 135
Probably the endpoints configuration is wrong
In CISCO 2600 Documentation ( CISCO 2600 and 3600 Routers MGCP Voice Gateway
Interoperability with Cisco CallManager) is not clear how to configure the
router like a MGCP Gateway or like a Call Agent.
Reading this document I understood CISCO can be configured both Gateway and
Call-Agent
Is it correct?
Where can I find other document on this point?
Try 1 800 533 2447 (cisco techsupport)
We now return you to your scheduled IETF list normally pointless
arguments...
_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
You can't depend on your judgement when your imagination is out of focus.
-- Mark Twain.
_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
OLTECO Ari Ollikainen
P.O. BOX 20088 Networking Architecture and Technology
Stanford, CA Ari(_at_)OLTECO(_dot_)com
94309-0088 415.517.3519