Thanks to those that helped with the "Reply-To:" delemia I had. It
appeared as though my problem was not using ":0 fh" but using just ":0".
Now onto something fun. Below is the header from one of my small list
subscribers. Look closly and you'll see after Content Type and before
hopfen(_at_)malz(_dot_)com there is a blank line. This blank line seperates the
To:
and Subject: info. As a result Procmail will not see the To: or Subject
and will not forward it. It believes that the blank line is now going
to start the mail.
My question, is there any way around it on my end? I know I could use
the From: and be able to forward this guys stuff, but if he gets on a
couple of my lists, this won't work correctly.....
Received: from crystal.iac.net (root(_at_)crystal(_dot_)iac(_dot_)net
[199.6.32.156]) by
columbia
.digiweb.com (8.7.5/8.7.3) with ESMTP id JAA28656 for
<beerscore(_at_)bjcp(_dot_)org>; Mon,
28 Apr 1997 09:54:38 -0400 (EDT)
From: hopfen(_at_)malz(_dot_)com
Received: from [199.6.41.250] by crystal.iac.net with ESMTP
id NAA19836; Mon, 28 Apr 1997 13:56:07 GMT
Date: Mon, 28 Apr 1997 13:56:07 GMT
X-Sender: hopfen(_at_)iac(_dot_)net
Message-Id: <v03102800af8a5b456fcd(_at_)[199(_dot_)6(_dot_)41(_dot_)250]>
In-Reply-To:
<199704281316(_dot_)JAA02708(_at_)dave(_dot_)nrl(_dot_)navy(_dot_)mil>
References: <199704272156(_dot_)QAA23241(_at_)xnet(_dot_)com> from
"korz(_at_)xnet(_dot_)com" at Apr
27, 97 04:56:39 pm
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
hopfen(_at_)malz(_dot_)com
Date: Mon, 28 Apr 1997 09:49:40 -0400
To: beerscore(_at_)bjcp(_dot_)org
From: Ed Westemeier <hopfen(_at_)malz(_dot_)com>
Subject: Re: issues list
--
Dennis Davison mailto:ddavison(_at_)execpc(_dot_)com
BJCP Representative for the Midwest
BJCP President
http://www.bjcp.org